Surface preparation:
Metal and non-ferrous metal surfaces primed with WS-Epoxy-Primer E 2030 or WS-Epoxy-Zinc-Dust-Primer E 2021. The intact surface must be clean, stable, dry, free of grease and dust and free from rust and oxidation residues.

Application:
Can be painted, rolled or sprayed. The minimum layer thickness should be 60 my

Drying Time (at 20° C and 65% relative humidity):
Dust dry: after approx. 45 minutes
Touch proof: after approx. 2 hours
Completey dry: after approx. 24 hours

In order to achieve optimum bonding of the individual layers, the topcoat should be applied no earlier than 24 hours and not later than 48 hours after the primer. After a longer period of time an intermediate sanding of the primer is absolutely necessary.