Surface preparation:
Contaminants which have a damaging effect on the paint or impair the adhesion to the surface must be removed. The surface must be clean, dry, stable, free of dust and grease. All rust and oxidation points must be removed. All metallic surfaces such as steel, iron, non-ferrous metals etc. must be primed. The primer used is WS-PUR-Acryl-Primer U1100 or WS-Epoxy-Primer E2030. Third-party products must be tested for compatibility.

Application:
The processing can be done by brushing and rolling. Stir well before use.

Drying Time:
Dust-dry: approx. 60 minutes
Touch proof: approx. 6-8 hours
Completely dry: approx. 12 hours
Oven drying: approx. 60 minutes at 60 ° C

Productiveness:
About 150 – 180g / m². 180 g / m² result in about 70my dry layer