Surface preparation:
Iron and steel surfaces must be clean, free of grease and dry (condensation moisture). Also rust, scale or skin must be removed. In case of old coatings, adhersion and compatibility must be tested. If necessary, sand the surface.

Application:
The processing can be done by brushing, rolling, conventional or airless spraying. Stir well before use.

Drying time:
Dust-dry: approx. 15 minutes
Recoatable: approx. 6 hours
Touch proof: about 6-8 hours
Dried through: 24 hours
Final hardness is reached after approx. 7 days
Oven drying: approx. 30 minutes at 80 ° C

Fertility:
180 g / m² per coat at 50my dry film thickness