Surface preparation:
The surface must be clean, free of grease and dry (condensation moisture). Also rust, scale or skin must be removed. In the case of old coatings, liability and compatibility must be tested. If necessary, sand the surface.

Application:
The processing can be done by brushing, rolling, conventional or airless spraying. All electrostatic methods are applicable. Stir well before use.

Drying time:
Dust-dry: approx. 10 minutes
Touch proof: about 1-2 hours
Recoatable: approx. 60 minutes
Dried through: 24 hours
Final hardness is reached after approx. 7 days

Fertility:
180 g / m² per coat at 50mμ dry film thickness