Usage:
The surface must be free of rust, grease, oil and polishes, then sand. Do not use primer. Apply at least two coats.
Important: A restrict solvent resistance is reached only after about 1-2 hours at 200 ° C heat load. The optimum film properties and the full chemical and mechanical resistance are reached after the first heat load of about 1 hour at least 400 ° C.

Application:
Shake the can thoroughly until the mixing balls are clearly audible. Spray several times crosswise from a distance of 15 to 20 cm.

Drying Time:
Approx. 1 hour (requires heat for final drying)

Productiveness:
Approx. 1m² / operation